Super Bright 15W LED PL Lamps G10 LED Retrofit Tube AC 100V - 277V
|Input Voltage:||AC 100~277V 50/60Hz|
|Light Source:||SMD LEDs|
|Color Temperature:||3000K (Warm), 4500K (Neutral), 6000K (Cool)|
|CRI:||80 Ra (Typical)|
|Base:||G10q / G24|
|Remark:||Compatible with ballasts|
B) Hospitals & shopping mall.
C) Residential lighting.
D) Offices & meeting rooms.
E) Places where need energy saving and high color rendering index lighting.
1. Neutral packing.
2. Neutral packing + your own labels.
3. Customized design packing (color boxes).
After Sales Service:
1. Quality assurance: All the products will go through 5 checks
during production,raw material check,Lights beads check,aluminum
plate check,power supply check and the finished products 48 hours
2. Warranty: 3 years warranty,the broken lights will be replaced
and the new lights will be sent to you together with your next
order, depend on detailed situation.
3. Competitive production capacity: monthly production more than
50,000 PCS of LED lights.
4. Manufactuer's price: direct sale from factory,competitive price.
|1: Compatible with electronic ballast (no re-wiring needed);|
2: Can be plugged in directly without removing and rewiring or
bypassing the electronic ballasts;
3: Can work in AC 100~277V directly;
4: UL certified;
|1: You just need to plug the G10 LED PL lamp into an existing
fixture with no rewiring no cutting of wires|
just plug them in and they will work.
2: If you use with ballast and ballast dies, then you can remove
ballast and reuse the tubes.
1: For retrofit project, you don’t need to remove ballast until
ballast fails, then you just remove ballast and
reinsert G10 LED PL lamp, it will work without ballast.
2: For new installation project, you can just install the G10 LED
PL lamp without any ballast, just direct
wiring to the lighting fitting at 100-277 Volts AC.